Woolwax® is formulated to be thicker and more resistant to wash-off .
Woolwax® is formulated to be thicker than any other lanolin based undercoating product.
Woolwax® has almost no smell. We have neutralized the strong woolgrease
odor with our proprietary process.
Woolwax® is formulated with more raw woolgrease (lanolin) than any
competitive product. That makes Woolwax® considerably thicker and more
resistant to wash-off for longer protection.
Woolwax® is applied using the same Kellsport Products spray guns that we have supplied for Fluid Film for 10+ years.
Woolwax® can be applied with most undercoating guns using 70-90 psi.
Since Woolwax® is
formulated thicker, in cold weather it may be necessary to heat up the Woolwax®
before applying. This is easily done by placing the container (bottle, pail,
etc) in front of a floor heater for 5-10 minutes. After warming, stir well.
WOOLWAX® is a lanolin based auto / truck undercoating made from raw WOOLWAX®.
WOOLWAX® sprays on wet and does not dry out.
WOOLWAX® creates a
thin lanolin film barrier to keep moisture and oxygen away from the base
metal. * Solvent free. Environmentally friendly. * Always active and
creeping into inaccessible areas. * WOOLWAX® will thicken to a gel film
after applied and is very resistant to wash off. * Provides vehicle
undercarriage protection for a full season. * Enclosed areas (doors,
frame-rails, rocker-panels, etc., that are not exposed to road-wash will
be protected indefinitely (years). This is the advantage of no
solvents. There is nothing to dry up and evaporate.
WOOLWAX® is a "honey"
color, but when applied appears fairly clear. WOOLWAX is a very clean
product as opposed to messy black products.
WOOLWAX® is a non-drip
formula. We make it to be as thick as possible to resist wash-off, yet
still easily sprayable.
WOOLWAX® can be applied with most undercoating
guns using a pressure of 70-90 psi. Proudly manufactured in U.S.A.
WOOLWAX® contains more raw woolwax (lanolin) than any competitive
product. This makes WOOLWAX® a more viscous (thicker) formula and much
more resistant to wash-off. Because of this thick formulation it may be
necessary to warm the WOOLWAX® for a few minutes in front of a floor
heater, before spraying. Once applied the WOOLWAX® will thicken to it's
original viscosity which is very resistant to wash-off and will provide a
longer period of protection.
that undercoat their vehicles with the "Black" Woolwax, use the "Straw"
(clear) color for inside the doors, and even on other areas that are
not visible. If you are ordering the Woolwax in Black, you may want to
consider getting a quart or two for the enclosed protected areas that
nobody will see. The quart containers are available at a discounted cost
from the options section.