Woolwax® is formulated to be thicker and more resistant to wash-off .
Woolwax® is formulated to be thicker than any other lanolin based undercoating product.
Woolwax® has almost no smell. We have neutralized the strong woolgrease
odor with our proprietary process.
Woolwax® is formulated with more raw woolgrease (lanolin) than any
competitive product. That makes Woolwax® considerably thicker and more
resistant to wash-off for longer protection.
Woolwax® can be applied with most undercoating guns using 70-90 psi.
Since Woolwax® is
formulated thicker, in cold weather it may be necessary to heat up the Woolwax®
before applying. This is easily done by placing the container (bottle, pail,
etc) in front of a floor heater for 5-10 minutes. After warming, stir well.
WOOLWAX® is a lanolin based auto / truck undercoating made from raw WOOLWAX®.
WOOLWAX® sprays on wet and does not dry out.
WOOLWAX® creates a
thin lanolin film barrier to keep moisture and oxygen away from the base
metal. * Solvent free. Environmentally friendly. * Always active and
creeping into inaccessible areas. * WOOLWAX® will thicken to a gel film
after applied and is very resistant to wash off. * Provides vehicle
undercarriage protection for a full season. * Enclosed areas (doors,
frame-rails, rocker-panels, etc., that are not exposed to road-wash will
be protected indefinitely (years). This is the advantage of no
solvents. There is nothing to dry up and evaporate.
WOOLWAX® is a "honey"
color, but when applied appears fairly clear. WOOLWAX is a very clean
product as opposed to messy black products.
WOOLWAX® is a non-drip
formula. We make it to be as thick as possible to resist wash-off, yet
still easily sprayable.
WOOLWAX® can be applied with most undercoating
guns using a pressure of 70-90 psi. Proudly manufactured in U.S.A.
WOOLWAX® contains more raw woolwax (lanolin) than any competitive
product. This makes WOOLWAX® a more viscous (thicker) formula and much
more resistant to wash-off. Because of this thick formulation it may be
necessary to warm the WOOLWAX® for a few minutes in front of a floor
heater, before spraying. Once applied the WOOLWAX® will thicken to it's
original viscosity which is very resistant to wash-off and will provide a
longer period of protection.