This is the Fluid Film & Woolwax applicator gun used by many of our professionalapplicator locations. We consider this to be the best applicator spray gun available for Fluid Film & Woolwax undercoating applications. We had this gun modified and developed specifically for woolgrease undercoating. This gun comes complete with (1) 16" aluminum straight wand and (1) 32" flexible 360° wand.
- Modified internally to apply Fluid Film® or Woolwax®
- Adjustable nozzle for flow control
- Includes (3) clear quart bottles with caps
- Includes 24"" flexible open-end wand
- Includes 32" flex 360° extension wand
- Includes brush applicator
- European Made
Air Compressors for Undercoating guns
We get this question all the time.
Kellsport Products undercoating guns use very little pressure. Only 70-90psi. Most
compressors run around 125 psi. So the psi and the cfm are not really
important in this application. The tank size is important. We recommend no
smaller than a 3 gallon tank size. Any smaller than that and you are
constantly waiting for the tank to recover. Most very small compressors
will say on the box "not adequate for spray painting". As long as you
can spray paint with a compressor, you can use it to undercoat. Many
people have told us they they have bought inexpensive compressors
($75+/-) from Harbor Freight or similar stores and they work just fine.
We suggest putting an inexpensive regulator ($10+/-) on the gun end
so you can tweak it from the gun without having to go back and forth to
the compressor. Don't try to remove the fitting at the bottom of the gun handle, as
it does not come off. It's a standard 1/4" fitting. bring the gun with
you to the store for the right connection.