We are starting to stock "AR", semi-liquid Fluid Film® Liquid AR as a result of some customer requests. It's a more industrial and heavy-marine type product. Call for in-stock availability and pricing.
Description:
Amber, soft gel. Environmentally friendlier. Solvent free. Non-toxic. Will not evaporate. Anti-corrosive coating, lubricant and penetrant for all metals
General Usage:
Used in heavy marine and general industry, particularly for ballast tanks and voids, chains, hoists, wire rope, winches, turnbuckles, conveyors, bearings, augers, drills, valves, linkages, scales, joints and zert fittings. Preserves parts in storage or during shipment.Used in the maintenance of aircraft, heavy equipment, and automobiles.Also used in refineries, salt plants, power plants and gas companies.
Application:
Airless spray, roller, brush or grease gun.If this soft gel is to be transferred from its original container into a spraying device, it is desirable to break the gel's thixotropy by mechanical agitation. The agitation will convert the product to a more liquid consistency and make pouring feasible.If conditions dictate a heavier coating or lubricant, refer to other Eureka Chemical Company Product Bulletins for semi-liquids, gels and greases or consult Eureka Chemical Company.
Particulars for Heavy Marine:
No sandblasting required. Remove flaking rust and peeling paint. Break all blisters larger than 25mm (one inch). Remove all standing water. Clean up all debris and silt. Residual coal tar and asphaltic coatings should be removed to leave a thickness of no more than 50 microns (0.002 inches).If sufficient time and/or funds are not available for ideal preparation, Fluid Film® Liquid AR may be applied with less preparation or none at all. In this case, it must be remembered that the product will soften scale to the point where exfoliation is likely. While this provides a relatively inexpensive method of descaling, tanks should be inspected more often, perhaps every several months, to determine if scale and coating have fallen. If so, touch-up of bare areas should be accomplished as soon as practical.
The shipping on (1) 5 gallon pail is about $15 - $25 depending on the location. Each pail has a shipping weight of about 44 Lbs. We generally ship 2 - 3 pails via UPS. Shipments that weigh over 125 Lbs. (4 pails) may be more cost effective to ship by truck. We will always shop to get our customers the absolute lowest shipping costs, and consult with you for your preference. *Note- UPS and Fedex both charge an additional $8 special handling fee for pails (anything not in a box)
Fluid Film may thicken when being stored. Fluid Film can be thinned out with a very small amount of vegetable oil.
Kellsport Products is a leading distributor of Fluid Film spray and gallon cans. Eureka Fluid Film is the worldwide standard in rust prevention.
